SnapMaker U1 Tool Set
The Snapmaker PTFE Removal Tools are precision maintenance accessories designed to simplify the safe removal and replacement of the Snapmaker U1 Feeder and Toolhead PTFE tubing.
Included Tools & Hints for Printing:
- HINT: Having an issue with letters sticking to build plate?
- If using a smooth plate (recomended for higher quality text) still set slicer to textured for that extra squish.
- Clean the build plate.
- Use a very light amount of glue stick or Nano Polymer
- Be sure you are using my profile or slow down the first layer even more (should not be required)
- QUALITY HINT: Smooth build plates will resolve better quality text and other fine detailed first layers. PRO TIP: set slicer to textured (even with smooth plates) for that extra squish.
- FEEDER PTFE Disconnect - Remove PTFE tube from the Feed Motor and rear of Printer
- TOOLHEAD PTFE Disconnect - Remove Larger PTFE tube from the Snapmaker Toolhead.
- If you want to up your cool game, use 6x2mm Magnets. Pay close attention to the magnets polarity (all should face same direction/polarity). They're designed to fit magnets snugly, but you might need a little glue for some of them.
K2_Kevin
