Turtle Pool Chlorine Floater 🐢
A fun and practical floating chlorine dispenser for pools, designed in the shape of a turtle.
The lower compartment is designed to hold up to 3 chlorine tablets (20g each). Once placed in the water, the floater slowly disperses chlorine while floating around the pool.
The bottom section is fully screwable/removable, making it easy to insert or replace the chlorine tablets whenever needed.
Printed entirely in PETG for improved durability, UV resistance, and better resistance to water and pool chemicals.
Features
- Holds up to 3 x 20g chlorine tablets
- Floating turtle design
- Screw-open bottom compartment
- Slow chlorine dispersion
- Easy to refill
- PETG recommended
Print Settings
- Material: PETG
- Supports: Yes
- Layer Height: 0.2 mm
- Infill: 15–20%
- Wall Count: 3
- Recommended for outdoor/pool use
Important Updates
I have uploaded two new print profiles that address all of the issues reported by users. The turtle is still printed in PETG, but one profile uses PLA supports while the other uses PETG supports.
- Changes made:
- * Enlarged the chlorine tablet dispenser to better fit standard tablets.
* Improved the placement of the holes on the dispenser.
* Redesigned the connection system between the dispenser and the turtle for better printability and reliability. - I recommend using one of these new profiles instead of the original one. Thank you for all your feedback and suggestions, which helped improve this design.
apexlayer
