Lilygo T-Display ESP32 with battery

I wanted a case to use with Securegen TOTP with parts I already had on hand.

Parts Used:
- Tenstar ESP32 T-Display (Lilygo clone)
  - https://www.aliexpress.us/item/3256806674575493.html
- 762653 Li-Po battery 3.7v 1000mAh 
  - 7.6mm x 26mm x 53mm (DxHxW) or smaller should fit

I printed with PLA and no supports and everything prints fine.

Back should friction fit, be careful with routing battery wires so pegs don't pinch them