Cup Holder

A cup holder quick to print and adjustable to three sizes.

 

There is also an optional wall mount - one for double sided adhesive pads and 
one that can be screwed on.

 

All parts are printed in the direction that ensures maximum strength.

 

As this is a functional part I HIGHLY recommend to print this in PETG.

During my test prints I also printed it in BambuLab PLA Basic but the flexibility of
PETG, especially as far as tha strap is concerned is far better.

 

In the print profile I use 3D Honeycomb for the infill of the strap. Please do NOT change this,
because during my testing I found this is best suited for that task.

 

Assembly ( like in the attached PDF )
1. Insert handle into holder (has a side pin that prevents wrong direction)
2. Insert lock plate (ensures handle is mechanically locked to holder)
3. Insert strap (also has pins that prevent wrong insert direction) - Three possible length positions
  Large - use both outer holes
  Mid - use one outer hole and one center hole
  Small - use both center holes
4. Put cover through handle and press it on holder (two pins clamp into holder)

 

Have fun

 

Boost Me