Shock Reservoir Clamp for Motorcycle

Shock reservoir clamp — mounts your remote reservoir to the subframe in minutes.

— DESIGN — 

Dual-ring bracket designed for motorcycles with a remote rear shock reservoir. One ring clamps to the subframe tube, the other secures the reservoir body — clean installation, no drilling, no welding. Designed for a friend's build and shared with the entire moto community.

— SPECS — 

Frame tube ring: 27mm inner diameter Reservoir ring: 53mm inner diameter Fasteners: 2× M6 bolts + M6 square nuts (one per side) Square nut inserts built into the print — no heat inserts required

— RECOMMENDED MATERIALS — 

PETG — good balance of flexibility and strength, recommended for most buildsPETG-CF or PA-CF — maximum rigidity, ideal for racing or high-vibration use Do NOT print in PLA — insufficient heat and vibration resistance for motorcycle use

— FITS — 

Any motorcycle with a 27mm subframe tube and a 53mm remote shock reservoir Compatible with most aftermarket reservoirs (Öhlins, YSS, WP, and similar)

⚠️ DISCLAIMER — READ BEFORE PRINTING This is a structural component. Print with high-quality PETG or CF filament, minimum 4 walls, 40% infill. The designer assumes no liability for improper installation or material choice. Inspect regularly for wear or fatigue.

— ALSO AVAILABLE — 

🏍️ More moto and functional parts coming soon on this profile

Designed in Rome, Italy.