Screen Arm Adapter Mount Arcade2TV-XR/TankstickVR

This adapter allows you to mount a monitor arm onto the Arcade2TV-XR / TankstickVR arcade panel using a commercially available monitor arm.

The model was designed and tested with the following monitor arm:
Battletron Dual Monitor Arm (Action)

However, the cylindrical mounting diameter used is a standard size.
Any monitor arm using a similar cylindrical/tube mounting system should also be compatible.

Originally, I planned to fully 3D print the entire articulated arm, but in the end this solution made much more sense:

• much faster;
• no dozens of hours of printing;
• costs about the same as a spool of filament;
• significantly better rigidity and reliability for supporting a monitor.

The printed part is therefore only used as an adapter between the arcade panel and the monitor arm.

Required Hardware

To assemble the adapter, you will need:

• 2x M8 threaded inserts
• 2x M8x10 screws

Make sure the inserts are properly installed before mounting the monitor arm.

Printing Recommendations

⚠️ PLA is NOT allowed for this print.

Only use technical filaments capable of handling long-term mechanical stress:

• ABS
• ASA
• Reinforced PETG (PETG-CF recommended)
• Nylon
• or any other strong engineering filament

Recommended print settings:

• high infill percentage;
• multiple walls/perimeters;
• print orientation optimized for strength.

Important Disclaimer

⚠️ This model has not yet been tested over a long period of time.

While initial tests are promising, I cannot guarantee long-term durability.

By downloading and using this model, you agree that:

• you print and use this part at your own risk;
• I am not responsible for any material damage;
• including possible monitor falls or broken screens.

Please regularly inspect:

• the condition of the printed part;
• screw tightness;
• any cracks or deformation.

Compatibility

Designed for:

• Arcade2TV-XR / TankstickVR arcade panel;
• monitor arms using a standard cylindrical/tube mounting system;
• standard VESA mounts.

Feedback and improvements are welcome 🙂

Boost MeA boost 🚀 or a like is always appreciated if this model helped your setup