Sour Patch Kids Slider + Flip Fidget (~30 mins)

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

🍬 First They’re Sweet… Then They’re Sour 🍬

These Sour Patch Kids candy inspired slider + flip fidgets bring the full candy experience — minus the sticky and sugary fingers. Flip it, slide it, twirl it, rotate it, twist it, and let it slip… because apparently one little fidget just wasn’t enough chaos. Featuring three versions — a classic sour patch kid, one with a bite taken out (we won’t ask who did it), and one waving like it knows it’s about to cause trouble.

Quick 30 minute print, in a single color – fun, and just the right amount of mischievous, these are perfect for anyone who likes their fidgets with a little personality. I intentionally designed the top to be rough using Hilbert curve to give it that sugary look.