Bally / WMS - 90's Pinball Short 2 Coin Bezel

This is the Short 2 coin slot bezel for the 90's Bally / WMS Pinball coin door.

This version is the 2 coin slot bezel for the USA / Canada where the coin door skin only has 2 coin mech slots. 

While printing front face down would be ideal the low angle bevel does not print great on some printers and with some needs supports and even then the supports affect the final finish. Therefore print as per the 3MF file bottom face down to plate with supports. The coin chute flanges will have steps in the print due the low angle approach but fortunately this is not seen once everything is assembled.

When it comes to preparing the posts for screws - please do not use self tapping screws as it will fail and split the small printed posts. 

• For imperial bolts tap the existing hole with a 6/32" thread and then you can use 6/32" bolts.
• For metric bolts tap the existing hole with a 3mm tap and then you can use 3mm bolts.

Enjoy

I do ask if you download something that was helpful for you - please give the model a LIKE, and RATE with a Photo, or a BOOST - as that gives me motivation to design, create and share more designs.

And if you want to hear about more designs being released click the FOLLOW button.