Cornice A4/A5/A6 - letter/half letter/statement

A3/Tabloid-Ledger VERSION: https://makerworld.com/it/models/2795688-cornice-a3-eu-us#profileId-3109386

This modular frame is designed for (internal dimensions of the poster):

• A4 , 29,7 x 21 cm and US letter 8.5 × 11 in 
• A5 14,8 x 21 cm and Half Letter / Statement 5.5 × 8.5 in
• A6 10,5 × 14,8 cm

It's divided into 4 separate parts to make printing easier and more practical on smaller printing tables.

The four parts are assembled using 2x6mm magnets , creating a clean and secure connection while still allowing the frame to be disassembled whenever needed.

The main idea behind this design is flexibility (look the gif) : thanks to the magnetic modular system, you can quickly replace the poster at any time without damaging the frame or removing it from the wall. It's perfect for those who like to frequently change out prints, artwork, photos, or seasonal decorations.

The frame is designed to be printed in PLA and mounted using just two strips of double-sided tape , one on the top section and one on the bottom section, so no screws or drilling are required.

The version shown in the photos has an internal depth of 3.5 mm , leaving room for a cardboard backing behind the poster for added rigidity and a cleaner look.
I've also included an additional version with a depth of 1.5 mm for those who prefer to use the poster without any backing material.

I RECOMMEND cleaning the plate with dish soap, so make sure you have a clean pan and keep the oven temperature as constant as possible, as the edges may lift.
In fact, I added a brim that should help prevent them from lifting.

Possibility to modify the measurements

thx <3