1967 Camaro SS front end

1967 Chevrolet Camaro SS front end

Large model - 465mm x 155mm x 85mm - 18.3" x 6.1" x 3.3"

 

Perfect for decorating your house, mancave or garage.

 

**I had issues with color bleed when printing the main body as 2 colors.  I have separated the black stripes of the body to be glued in separately.  If you have a dual nozzle printer or want to play with the print purge settings, etc., I have uploaded a separate print profile with the main body and stripes together.**

 

 

Assembly with super glue:

1. Glue the Right and Left body together using the dowels for alignment.
2. Glue the stipes into the main bodies. - Depending on your printer's quality and calibration, you might have to trim the stipe inserts with a precision cutter.  They came out fine for me with the 0.12 high quality print profile.
3. Glue the Right and Left side grill tohether.
4. Glue the grille into the body.
5. Glue the light assemblies into the body.
6. Glue the black hole inserts into the body.
7. Glue the chrome bumper onto the body. - there are dowels on the body for alignment.
8. Optional - Glue the bumper horns to the chrome bumper if preferred.
9. Glue the badges into place.

I hope you enjoy the assembly and the outcome of this model as much as I did.

 

Check out my other front end models:

https://makerworld.com/en/collections/22611046-car-front-ends

 

Boost MeIf you like this model and want to see more car front ends, please consider boosting me.  Additional support link here: buymeacoffee.com/mxdesigns