Foldable Lightweight Plant Moss Pole

Lightweight foldable moss pole designed to print flat and assemble with integrated snap-fit joints. Uses very little material while remaining rigid after assembly.

 

⚠️ Difficult print — requires a well-calibrated printer and good layer adhesion.
Recommended materials:

• PETG
• ASA
• Other slightly flexible filaments

PLA may crack during assembly.

Please do not leave negative reviews caused by print inaccuracies, poor calibration, or incorrect material choice.

Assembly

Bend the model gradually using a desk edge, tabletop, or wooden board.Heating a little might be a good idea too. Then snap the joints together section by section.

 

 

Boost MeYou liked my work ? leave me a boost ^^

 

Let me know, if You need longer/ shorter version.