Boost MeFeedback is always welcome! If you like the design, please consider uploading a make and leaving a rating. Happy printing!
Screw-Mount Wall Bracket for Nuki Keypad 2
This is a robust, clean, and screw-mountable wall bracket designed specifically for the Nuki Keypad 2.
While the original Nuki Keypad only comes with an adhesive backing, this custom mount allows you to securely screw the keypad to your brick wall, wooden frame, or siding.
🌟 Features
- Secure Mechanical Mount: No more worrying about the adhesive failing in extreme heat, rain, or cold.
- Perfect Flush Fit: Designed with tight tolerances to hold the Keypad 2 snugly while keeping a slim, minimalist profile.
- Hidden Screws: The screw holes are placed so that the Keypad covers them completely once inserted, maintaining a clean look and adding a layer of security.
- Easy Battery Access: You can still slide the keypad out (with a bit of clever friction/release) or access it depending on your preference, without unscrewing the base.
🛠️ Recommended Print Settings
Since this object lives outdoors, choosing the right material is key!
- Material: ASA or PETG are highly recommended for outdoor use due to UV and weather resistance. Avoid PLA as it will warp in direct sunlight.
- Infill: 20% – 30% (Grid, Gyroid, or Adaptive Cubic)
- Wall Loops / Perimeters: 3 or 4 (for strength around the screw holes)
- Layer Height: 0.16mm works perfectly
- Supports: No supports needed if printed flat on the back.
📐 Installation Notes
- Mount the bracket to your wall using two small countersunk screws.
- Ensure the screw heads are fully flush so they don't interfere with the Keypad.
- Slide or snap your Nuki Keypad 2 into place.
MBP96
