Infinite Seamless Lightweight Skadis - Voronoi

Boost MeBoost me, if you like my Infinite seamless voronoi Skadis pegboard.

Pegboards compatible with the Ikea Skadis system. These boards can be linked seamlessly. No space is wasted between the separate boards.

 

There are two different types of connectors. Both of them have notches on the backside for M3 hex nuts. Use M3x10 to M3x14 screws to connect the boards. 

• One set of connectors blocks some of the pegboard holes. These are somewhat easier to install and make the whole construction sturdier. 
• The other set of connectors does not block any holes. 

There are boards with 240x240 mm boards and 160x160 mm boards. 

 

If you want to print the 240 x 240 mm boards with a P1/X1 printer, you need to change the stock settings of the printer. First, you need to click on your printer model “Click to edit preset”:

This will open the “Printer settings”. You need to delete the default values for “Bed exclude area”. Just delete the values in the red box in the picture below. Then save the profile under a new name by clicking on the small disk icon. To print the 240x240 mm boards, you have to use the printer profile you just saved.