May 24, 2026
Description
A lightweight anti-clog protection accessory designed for the cutting system of the Mammotion YUKA Mini Series.
The Anti-Clog Guard is installed between the rotating cutting disc, the blade, and the mounting screw, covering the exposed gap where grass, dirt, and debris normally accumulate during operation.
During mowing, the cutting disc rotates at very high speed. Over time, grass and debris tend to compact around the blade screw area, especially in wet conditions.
This buildup can:
The Anti-Clog Guard helps reduce this buildup by covering and protecting the exposed space around the blade mounting system while still maintaining free blade movement.
Boost MeIf this design helped you, I’d really appreciate a Boost 💛
✅ Helps reduce grass and dirt buildup
✅ Maintains free blade movement
✅ Lightweight and compact design
✅ Easy to install
✅ Improves cleaning and maintenance access
✅ Designed specifically for the Mammotion YUKA Mini Series
Unlike rigid spacers or locking systems, this accessory does NOT lock the blades in place.
The blades remain free-moving, preserving proper cutting behavior and natural movement during operation.
The design features approximately 45° angled side cuts intended to improve airflow around the rotating assembly.
Since the cutting disc operates at high RPM, completely flat surfaces may create small turbulence and micro vibrations over time.
These angled cuts help slightly improve aerodynamics and contribute to smoother and more balanced operation.
The model currently includes two different variants designed to fit different screw types commonly used on the YUKA Mini:
Designed for the original factory screws included with the Mammotion YUKA Mini.
This version has a slightly taller profile to properly match the length of the original screws.
Designed for shorter aftermarket screws commonly found on Amazon, AliExpress, and similar stores.
This version features a lower and more compact profile.
If needed, you can also easily adjust the diameter or height directly in your slicer by slightly scaling the model to fit your setup.
And of course, if you need a custom size or a specific variant for another screw type, feel free to send me a message and I’ll gladly try to help 😊
During testing, PETG has shown very good results.
Currently, ASA Kevlar is the preferred material thanks to its excellent:
For good durability, the following settings are recommended:
Installation is quick and simple.
Please refer to the photos for proper assembly orientation.
⚠️ Important:
Be careful while handling mower blades.
The blades are sharp and may cause injury during installation or maintenance.
This accessory is designed to help reduce grass buildup and improve maintenance convenience around the cutting system.
Results may vary depending on grass type, humidity, mowing conditions, and blade condition.
💛 Designed by SALOSTUDIO
License:
Standard Digital File License
salostudio
