AMS Handle Snap-On Filament Dry Box Label Holder

This is a clean, mechanical solution for your Bambu Lab AMS to hold your filament labels!

This 2-piece filament label holder clamps directly onto the stock round AMS lid handle. It stays securely in place by using a main front bar and a separate rear locking clip that secure together around the factory handle geometry. It won't wobble or fall off when you open the lid.

Fits perfectly with: https://makerworld.com/pl/models/395861-filament-dry-box-hinged-label#profileId-297168

Design Details & Print Notes:

• 0.1mm Tolerance: The connection between the main holder and the rear lock has a 0.1mm clearance to ensure a perfect, tight press-fit.
• 1mm Clearance for Smooth Closing: The main front element intentionally protrudes 1mm beyond the AMS frame to prevent any clearance issues or binding when closing the lid.
• 2-Piece Clamp Design: Consists of the main front holder and a separate secure rear lock.
• No Glue / No Tape: Keeps your AMS pristine. 100% mechanical fit.
• Rock Solid: The rear connector locks the holder tightly around the round handle, making it completely stable during lid operation.

Print Settings:

• Material: PLA or PETG.
• Supports: No supports needed.