Plenty of fun ahead with this cute submarine!
- You can move its gripper arms, its telescope and its propeller!
- For adjusting the floating properties there is space for two coins inside the submarine.
- You can print all the parts in different colors even with a normal single extruder printer. No AMS needed!
Print Settings:
- No supports needed.
- You can use a skirt for the gripper arms.
- All layerheights from 0,1mm to 0,2mm should work just fine.
Assembly:
- Use short filament pieces to align the parts when gluing them together.
- For the propeller you can use one M2x10mm screw, or you can glue it in place with the help of a filament piece.
- Warning: Small pieces. Not recommended for very young children.
Boost MeIt would be very kind if you could boost my model, leave a like and a rating. Makes my day! =)
Work in progress. Feedback welcome! =)