Pool Hose Connector 32mm – Easy, Strong & Reliable

Need to connect two 32mm pool hoses quickly and securely?

This 3D printed connector is designed to create a solid and leak-resistant connection while keeping printing and assembly simple.

One of the key features of this model is the custom support system:
the supports are intentionally designed to guarantee a clean, precise and perfectly finished connector, especially around the sealing areas and O-ring seats.

✅ Optimized supports for better print quality
✅ Very easy to remove
✅ Clean final finish with minimal cleanup
✅ Reliable seal when paired with the correct O-rings

🖨️ Print Recommendations

For outdoor and water-related use, printing at least in PETG is strongly recommended to ensure durability and better resistance.

To improve waterproofing, I also recommend applying a light spray coat of paint on the inside of the print.
This helps reduce the chance of water slowly infiltrating through the layer lines over time.

🔩 Required Parts

You will need:

• O-rings 30x25x2.5mm

https://amzn.to/4uxX9Ai
(30mm OD × 25mm ID × 2.5mm thickness)

Simple to print, easy to assemble, and ready for your pool setup 🌊