Light box/Lamp Monster Energy

The file was carefully hand-drawn in CorelDRAW as a clean vector design, then converted into a 3D object in Fusion 360. This ensures clean straight lines, precise angles, and smooth curves.

The light box is fully ready for printing.

The box consists of two parts — a front and a back piece. The LED strip is attached to the back part, with a 3.5 mm opening for the cable. The back piece is glued to the front piece, leaving a 0.2 mm tolerance for easier assembly and featuring a 7 mm internal guiding edge.

C200 wood glue was used for assembling the parts. It dries in about 30 minutes, giving you enough time for careful and stress-free assembly.

The file is fully prepared for printing, and all necessary settings have already been completed.

3D printing settings

Printer used: Bambu Lab P2S
Material used:Bambu Lap Basic PLA
Size:
-Light box : 249 mm x 196 mm x 4,5 mm
-Stand : none
Filament:
-Face: 122 gram
-Back: 71 gram
-Stand: noone
Printing time:
-Face: 3:03 h
-Back: 1:25 h
-Stand: none