May 28, 2026
Description
The file was carefully hand-drawn in CorelDRAW as a clean vector design, then converted into a 3D object in Fusion 360. This ensures clean straight lines, precise angles, and smooth curves.
The light box is fully ready for printing.
The box consists of two parts — a front and a back piece. The LED strip is attached to the back part, with a 3.5 mm opening for the cable. The back piece is glued to the front piece, leaving a 0.2 mm tolerance for easier assembly and featuring a 7 mm internal guiding edge.
C200 wood glue was used for assembling the parts. It dries in about 30 minutes, giving you enough time for careful and stress-free assembly.
The file is fully prepared for printing, and all necessary settings have already been completed.
Printer used: Bambu Lab P2S
Material used:Bambu Lap Basic PLA
Size:
-Light box : 242 mm x 195 mm x 4,9 mm
-Stand : none
Filament:
-Face: 308 gram
-Back: 61 gram
-Stand: none
Printing time:
-Face: 9:24 h
-Back: 1:31 h
-Stand: none
License:
Standard Digital File License
Vladura
