Messi #10 Argentina - Hueforge

Messi tribute in 4 colours. 

 

• 150x150mm as pictured in a friction fit frame
• Use a higher TD white if you want to blend a bit better in some areas (I used a 2 TD)
• Attached a larger 200x200 STL

• I print everything manually switching filaments on A1 mini, you don't need an AMS for hueforges.

   

How to Print:

Layer Height 0.08

Base Layer Height 0.16

100% infill 

 

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Tropical Turqoise
    At layer #19 (1.6mm) swap to White for the rest.
 

Filaments Used:

PLA PolyLite Black  Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray  Transmission Distance: 3
PLA Anycubic Tropical Turqoise  Transmission Distance: 2.2

PLA Soleyin White  Transmission Distance: 2 (PICTURED)
PLA PolyLite White  Transmission Distance: 5 (IDEAL)

PSA: I used a 2 TD white and I would of preferred something in the 5-7 range but it still worked out.

 

Boost MeAny support makes my day and is not just a drop in the pan.
Happy Printing!