Overview
A clean, simple, and secure solution for mounting frameless mirrors to your wall. This kit uses 4 printed clips (2 at the bottom to support the weight, and 2 higher up on the sides to prevent tipping) to hold the glass firmly in place while keeping a minimalist aesthetic.
Features
- Frameless Design: Minimal visual impact, allowing your mirror to look modern and clean.
- Secure Fit: Features a precise inner channel that tightly hugs the mirror edge.
- Easy to Mount: Countersunk screw hole for a flush finish so the screw head won't scratch the back of your mirror.
🛠️ Bill of Materials (BOM)
- Printed Parts: 4x Mirror Clips (Print more if your mirror is exceptionally large or heavy).
- Hardware: 4x Countersunk Screws + appropriate wall plugs/anchors for your wall type.
🖨️ Recommended Print Settings
- Filament: PETG, ABS, or ASA are highly recommended for long-term mechanical strength under load. (PLA can be used but may deform over time under constant pressure).
- Wall Loops: 4 - 5 Walls (Crucial for the strength of the hook profile).
- Infill Density: 40% - 50% (Gyroid or Rectilinear).
- Supports: No (Orient the part flat on its side on the build plate for 100% support-free printing and optimal layer orientation strength).
🔧 Installation Guide
- Position your mirror on the wall and mark the bottom corners.
- Install the two bottom clips into the wall using your wall plugs and screws.
- Place the mirror into the bottom clips.
- Slide the two side clips into place near the top corners, mark the holes, and screw them securely to lock the mirror in.
💬 Need a different gap width for thicker glass or a specific style? Leave a comment below, and I'll gladly upload an alternative version for you!
bar design
