May 30, 2026
Description
I really liked the Dummy 13 concept, so I decided to turn the King of Pop into one!
This Michael Jackson Dummy 13 is designed to be as accurate as possible while remaining easy to print. No AMS is required for the model, except optionally for the head. I have included all necessary .3mf files, with versions for both AMS and non-AMS printing. All plates are separated and organized for convenience.
Important: Print each part in its provided orientation and on its designated plate. The tolerances and fittings are very precise, and changing the orientation may affect the fit of the parts.
No glue is required for assembly, but adding a small amount can improve durability, especially on the tie.
I have also included a separate suit version that can be printed together with the tie, allowing for additional customization.
This is my first adaptation of a model like this, so if you encounter any issues or have suggestions for improvement, please leave a comment. I'll do my best to help and update the files if necessary.
⚠️ IMPORTANT WARNING
BE CAREFUL WHEN REMOVING SUPPORTS, ESPECIALLY FROM THE TIE!
The tie is the most delicate part of the model and can break if too much force is applied while removing supports. Take your time and use flush cutters or a hobby knife if necessary. Removing supports slowly and carefully will give the best results.
You can find the original Dummy 13 assembly instructions on Printables from the original creators:
Enjoy building your Michael Jackson Dummy 13!
Extra instructions Below
Boost MeIts free real estate 0_0
License:
BY-NC-SA
FalconeX9
