[Gelsoft] KAC Skyscraper mount

A red dot mount/riser made for the Aimpoint Micro pattern sights, to be paired with magnifiers

The files contain 2 mounts, 1 at 2.33" centerline height like the real mount, the other at 2.26" centerline height, so you can use them with flip-to-center magnifiers and use the picatinny section for laser devices. Both mounts use the same clamps

Hardware needed:

- Each mount only requires 2 M4x30mm screws to be attached to a picatinny rail

- Insert the screw from the side of the small clamp piece. The screw is meant to be tightly lodged into the mount

This print is mostly for decorative purposes. Print in strong materials like PETG and with high infill if you have other uses for it.