A pocket-sized facial-hair comb modeled after the classic Kent A 81T sawcut comb — the little curved-handle comb every mustache-grooming guide recommends. Redrawn from scratch as a clean parametric model.
Fits in a wallet, pocket, or dopp kit. Prints in about 6–12 minutes and uses ~4 grams of filament, so a single spool makes hundreds.
Features
True-to-original silhouette — gently crowned spine, fine teeth on the front ~55%, and the signature curved "fishtail" handle with a concave underside that doubles as an index-finger rest.
Reinforced end tines — the two outermost teeth are thickened (1.6mm) so they won't snap, while the inner teeth stay fine (0.9mm teeth / 0.8mm gaps, ~22 teeth).
Decorative swirl embossed into the handle.
Rounded, skin-friendly edges — top edge chamfered, tooth tips eased.
Prints flat, no supports — flat bottom for great bed adhesion; the geometry has zero overhangs.
Print Settings
Material: PLA (PETG for extra toughness
Layer height: 0.12–0.16mm recommended for crisp, well-separated teeth (0.20mm works but looks coarser)
Walls: 3+ (the fine teeth are almost entirely perimeter
Infill: 15%
Dimensions
76 × 24 × 3 mm (≈ 3 × 1 × 0.12 in)
Notes
Designed to match the real Kent A 81T as closely as a 0.4mm nozzle allows — the original's ~1mm teeth can't be reproduced at that nozzle size, so the teeth here are tuned to the finest spacing that prints reliably. you should also buy a Kent A 81T, they are unmatched.
Not affiliated with or endorsed by Kent Brushes — "Kent A 81T" referenced for fit/style description only.
dimatosj
