Cheer on the New York Knicks with this spinning rally chain!
Boost MeLooking for more teams? Send me a boost and let me know which team you want next!
Building Your Chain
Once everything has been printed, follow the steps below to put your rally chain together.
Glue the Middle Post to the Base
Glue the Logo Posts to the Logo
Put a 608 Bearing into the middle of the baseball
Note: The bearing hole will be a tight fit, but I promise it fits. I typically put the bearing part way in then use my palm and weight to push it all the way in. It should be flush with the spinner
Glue the single Logo Post to the Base
Once everything has dried, put the baseball on the Middle Post
Glue the bottoms of the Logo Posts and put the Logo and Logo Posts on top.
Note: You should hear a click when everything is in place. I will typically place a 5 pound weight on it for a bit to make sure it sets correctly.
Once everything has dried again, print some links and get to spinning!
Looking for Rally Chain links? Click on the link below!
therealmacjeezy
