Elegant Hollow Design Dachshund Sculpture

Elegant Hollow Design Dachshund Sculpture

The open design allows light to pass through, casting beautiful architectural shadows

Boost MeBoosts are fuel for my brain! :)

 

Bring some sleek, contemporary art into your home with this stunning Dachshund (Dackel) sculpture! This design perfectly captures the iconic, elongated silhouette of the beloved wiener dog using sweeping, organic curves and a unique hollow-body framework.

 

Thanks to the hollow design, it uses less filament and prints efficiently, yet remains a massive, eye-catching centerpiece. 

 

8 cm high & 15 cm long

 

Check out my Elegant Hollow Design Models!:

Elegant Hollow Design Cat Sculpture

 

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

 

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] hiddem seams, optimised settings.
This includes a layer height of 0.12 mm and hidden seams. 

Additional supports have been added to minimalize the risk of print errors.

I recommend PLA Basic Dark Grey or PLA Matte Bonewhite and the settings in my print profil for a high quality print.

 

Support Structures:

Be careful when removing the support structures to avoid breaking it.

The Design and my Print Profil is designed with minimal but necessary supports.

 

Assemble:

For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one.
I personally use German super glue. It dries within a few seconds and creates a very strong bond.

 

I recommend performing a dry fit before gluing, as the dog offers very little surface area for gripping and the parts have off-center weights.

 

Apply adhesive and align the two parts with each other.

 

If you feel somewhat unsure, you can use the alignment guide/rail. As shown in the image, press against the alignment guide from below with your thumb and from above with your finger, applying gentle pressure. Then, take the rear half and slide it into place along the alignment guide. Use the thumb and finger on the back of the dog to align the two halves, applying a little pressure.

 

 

 

Check out my other Models!

 

Have fun printing!