LEGOs Porsche 911 BBS Le Mans

Complete set of BBS Le Mans wheels for LEGOs Porsche 911.

The small details on the rims require a 0.2 mm nozzle for the best results.

The tires need to be printed in TPU and fitted afterwards, just like the real deal! ;)

Installation guide:

Front: The original front axles will need to be swapped for the shorter printed ones.

1. Unhook the front ball joints
2. Remove the original axles and brake rotors
3. Press in the printed axles
4. Reassemble

Rear: The new wheels have a much lower offset than the standard wheels. 

For this reason, the rear axle will have to be redesigned. I have included a few pictures showing how I achieved this using only the existing bricks. This setup provides the perfect fitment! :)

Tires: The TPU printet tires can be a bit tricky to fit. I have found that using a flathead screwdriver as a tyreiron works the best.