Miniature Full Bed Frame

A miniature full bed which might be carved wood.  When all set up, it is approximately 6 1/4 (162mm) long by 4 7/8 (123mm) wide and 5 1/8 (135mm) high.

This was a real labor of love.  All the little feet and finials on the foot board want to print as airy shells.  I had to cut them all off and print them separately with the setting, “close holes.”  But the headboard needed to be sliced the regular way (otherwise it prints without all the detail and without cut-outs).  So. make sure you print this with the slicing and print profile provided. 

The sides were cut off just to allow for faster printing and less supports.

Once printed, you will need to cut off the feet and the finials (airy) from the foot board and replace them with the extras (solid ones) included.