Car Jack for Mini-Cooper & BMW series

BMW & MINI Jack Pad – Strong Lift Point Adapter

This 3D model is a jack pad / lift point adapter designed based on the dimensions of an existing commercial Product. It is intended to match OEM-style pinch weld lifting points commonly found on BMW and MINI vehicles.

The model provides a stable and protective interface between a floor jack and the vehicle’s lifting points, helping to prevent deformation, paint damage, or slipping during lifting.

Compatible Vehicles (verify fitment before use)

This design is generally compatible with many BMW models and MINI models that use standard pinch weld lift points, including but not limited to:

• BMW Z4 (various generations)
• BMW 1 Series (F20 / F21)
• BMW 3 Series (E90 / F30 and similar platforms)
• BMW 5 Series (F10 and similar platforms)
• MINI Cooper / MINI Hatch (R50 / R56 / F56 platforms)
• Other BMW/MINI models with similar OEM jack point geometry

⚠️ Always verify your vehicle’s lifting point dimensions before use.

Print Settings

• Material: PLA (acceptable) / PETG (recommended for improved safety margin)
• Infill: 100% Gyroid
• Wall count: 8 perimeters
• Layer height: 0.12–0.20 mm
• Print orientation: Strong layer adhesion under vertical compression

Safety Notice

This is a functional automotive tool. Inspect before every use for cracks, deformation, or wear. Do not rely on this part as the only support when working under a vehicle. Always use jack stands.

Use at your own risk.