40K 11th Edition Footprint Accs - Conduit Struts

Accessory for Long Line and Short Line area terrain footprints.

 

The conduit struts elevate Plasma Conduits to around 4".

This helps to recreate some of the 11th edition terrain layout for long and short lines using Plasma Conduit pipes.

 

There's also a damaged version to add flavour. 

 

Footprints compatible with this model:

		Long Lines - 10” x 2.5”
		Short Lines - 6” x 2”

Assembly

1. Place the connectors into the front panel
   • The lower connector has a tight fit and might need a bit of trimming or persuasion!
2. Assemble the back panel and the front panel, press them together
3. Glue the side panels into place with CA glue (superglue)
   • Side panels have a loose fit, they'll have a small gap all around
4. Glue the bottom panel into place
5. [optional] I recommed glueing either the struts onto the footprints, or the pipes to the struts, to give the assembly more stability

 

Printing notes

• Make sure you have good bed adhesion! Please clean your plate with dish soap before printing
• Let the model cool completely before removing it from the build plate

 

 

Follow me for more designs.

Have fun printing and let me know your ideas!

 

Boost MeIf you like the model, a boost is greatly appreciated - it helps support further designs and iterations!

Changelog

v205	Initial upload