• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
末日机甲战士3D 桌面手办 3D Printer File Image 1
末日机甲战士3D 桌面手办 3D Printer File Image 2
末日机甲战士3D 桌面手办 3D Printer File Thumbnail 1
末日机甲战士3D 桌面手办 3D Printer File Thumbnail 2

末日机甲战士3D 桌面手办

霧隱門AI實驗室 avatar霧隱門AI實驗室

June 6, 2026

makerworld-icon
DescriptionCommentsTags

Description

 

末日废土】原创末日机甲战士手办(内附拓竹 3MF 一键切片文件)🤖🌋

💡 模型简介: 这是一款纯粹的、充满硬核工业张力的原创末日机甲战士 3D 打印手办。设计灵感源于废土科幻与非人类物种机甲美学。模型具有极其锋利的几何装甲切面、复杂的机械细节刻画,以及为了展现末日风骨而设计的宽大稳固底座。

本作品不含任何电子元器件或机器人结构,是一尊纯粹供创客同好打印、涂装、桌面收藏的硬核静态潮玩。

🛠️ 拓竹 3MF 官方切片工艺说明: 为了让大家到手即打、绝不翻车,我已将多次死磕、微调后的完美参数打包成了 拓竹官方 3MF 格式。一键开打,核心物理防御参数如下:

  • 工艺预设: 整体锁定在 0.20mm Standard,这是兼顾装甲外壳强硬度与线条锐利度的天选层高。
  • 绝对抓地防御: 鉴于脚部有精细的履带/机械骨骼开孔,为了彻底杜绝首层粘不住而导致的翻车,3MF 文件中已预设了 5mm 仅外侧裙边 (Outer Brim Only)。
  • 硬核物理提示: 打印前请务必使用洗洁精将 PEI 纹理板冲洗干净,无油污的盘面配合 3MF 预设,首层抓地将稳如泰山。

⚠️ 版权与严正声明: 本作品由【雾隐门AI实验室】独立研发建模。仅供全球 3D 打印爱好者技术交流与自娱自乐,本模型文件(含 3MF)严禁任何个人或组织将其用于商业销售或盈利行为!

【Apocalypse Sci-Fi】Original Wasteland Mecha Warrior Figurine (Bambu 3MF Ready) 🤖🌋

💡 About The Model: A pure, high-detailed original wasteland mecha warrior figure for 3D printing enthusiast. Inspired by post-apocalyptic sci-fi aesthetics and non-humanoid warmachines, this model features sharp geometric armor plating, rich industrial details, and a solid, broad display base.

This is a purely static 3D print model with NO electronics, MCU, or robotic components. Perfect for painting, weathering, and desktop display.

🛠️ Bambu 3MF Slicing & Print Profile Notes: To save your time and prevent failure, I have fine-tuned all slicing parameters and packed them into this official Bambu 3MF file. Ready to print out of the box with the following defenses:

  • Layer Height: Fixed at 0.20mm Standard for the perfect balance between structural strength and crisp armor edge definitions.
  • Bed Adhesion Safeguard: To fully counter any early-stage detaching due to complex mechanical feet details, a 5mm Outer Brim Only has been pre-configured in the 3MF profile.
  • Pro Tip: Make sure to wash your PEI plate thoroughly with dish soap before pressing print. No fingerprints mean ultimate bed adhesion.

⚠️ Strictly Non-Commercial License: Independently developed by Wuyinmen AI Lab. Shared exclusively for the maker community's personal enjoyment and technical exchange. Commercial exploitation, unauthorized resale, or redistribution of this model/3MF file is strictly prohibited.

License:

Standard Digital File License

Related Models

EVA Unit 01 Head Bust from Neon Genesis Evangelion preview image

EVA Unit 01 Head Bust from Neon Genesis Evangelion

Whatever6 profile image

Whatever6

1,048

擎天柱 preview image

擎天柱

M Armory profile image

M Armory

513

Eva 01 Head preview image

Eva 01 Head

DesmoTwin16 profile image

DesmoTwin16

650

异形 preview image

异形

小顾同学 profile image

小顾同学

1,053

可穿戴机甲利刃护盾 preview image

可穿戴机甲利刃护盾

小红薯手工人 profile image

小红薯手工人

465