June 8, 2026
Description
Update:
更新说明：
Some users reported that the model could be accidentally knocked off the build plate while inserting the plug parts during assembly.
有用户反馈，在组装插头部件时可能会不小心将模型从热床上碰掉。
To address this issue, I have added a fully AMS-printable version of the plug.
为了解决这个问题，我新增了一个可直接使用 AMS 打印的插头版本。
The AMS version is included on the last plate.
AMS 版本已放置在最后一盘中。
It can be printed directly without pausing the print or inserting parts manually.
无需暂停打印，也无需中途手动插入零件即可完成打印。
Thank you for the feedback and suggestions!
感谢大家的反馈与建议！
Complete your iPhone 17 Pro Mini display setup with matching cases, a MagSafe charger, and a power adapter.
使用配套保护壳、MagSafe 充电器和电源适配器，完善您的 iPhone 17 Pro Mini 展示模型。
Perfect for collectors, display builds, photography props, and miniature setups.
适用于收藏展示、场景搭建、摄影道具和微缩模型制作。
iPhone17Pro mini
模型链接：https://makerworld.com/zh/models/2208122-iphone-17-pro-mini#profileId-3232541
iphone17-pro-mini-box-packaging
包装盒链接：https://makerworld.com/zh/models/2720464-iphone17-pro-mini-box-packaging#profileId-3013602
These models are decorative accessories intended only for use with the 3D printed iPhone 17 Pro Mini model.
这些模型仅作为 3D 打印版 iPhone 17 Pro Mini 的展示配件使用。
⚠️ Do NOT connect, plug in, or attempt to use the printed charger or power adapter with any real electronic device.
⚠️ 请勿将打印的充电器或电源适配器连接至任何真实电子设备。
⚠️ Do NOT insert the printed power adapter into a real wall outlet.
⚠️ 请勿将打印的电源适配器插入真实电源插座。
These models contain no functional electronic components and are intended for display, photography, prototyping, and collection purposes only.
这些模型不包含任何功能性电子元件，仅用于展示、摄影、原型制作和收藏用途。
These accessories were designed specifically for the iPhone 17 Pro Mini display model.
这些配件专为 iPhone 17 Pro Mini 展示模型设计。
Some models require print pauses and part insertion during printing.
部分模型需要在打印过程中暂停并插入零件。
I have added the required pauses to my print profile.
我已经在打印配置文件中添加了所需的暂停点。
However, after uploading and downloading the profile from MakerWorld, I noticed that some pause commands may disappear.
但是在 MakerWorld 上传和重新下载配置文件后，我发现部分暂停指令可能会丢失。
If your downloaded profile does not contain the pauses, please add them manually following the instructions below.
如果您下载的配置文件中没有暂停点，请按照以下说明手动添加。
The first version of the MagSafe USB-C connector was too fragile.
第一版 MagSafe USB-C 连接器过于脆弱。
Because of the print orientation along the Z-axis, the layer bonding strength was insufficient.
由于沿 Z 轴方向打印，层与层之间的结合强度不足。
As a result, the connector could easily break during handling.
因此连接器在使用或把玩时容易断裂。
That is why the USB-C connector was redesigned into its current shape.
这也是我将 USB-C 连接器重新设计为当前结构的原因。
Cut a piece of filament to a suitable length and insert it into the hole on the bottom.
剪下一段合适长度的耗材并插入底部的孔中。
If you dont want to print magsafe you can print two USB C
不想打印magesafe的可以打印两份USB C
print the two plug pieces first.
先打印两个插头部件。
After that Insert the plug pieces into the designated slots during printing.
在打印过程中将插头部件插入对应位置。
Pause the print at Layer 26.
在第 26 层暂停打印。
Pause the print again at Layer 88.
在第 88 层再次暂停打印。
After inserting the parts, resume printing.
插入零件后继续打印。
Before you print this you need to know Because PLA filament is relatively rigid using it as cable and the magnets are quite small, the magnetic effect may not be ideal.
由于 PLA 耗材相对较硬，且磁铁尺寸较小，因此磁吸效果可能并不理想。
Pause the print at Layer 15.
在第 15 层暂停打印。
Insert one 4×2 mm magnets into the designated slots.
将 1个 4×2 mm 磁铁放入预留位置。
Resume printing and change the filament from silver to white on the next layer.
继续打印，并在下一层将耗材从银色更换为白色。
If you already print the magfafe case and insert the magnet make sure the magnets are installed with the correct polarity before resuming the print.
如果你已经打印了magsafe 保护壳并安装了磁铁 在继续打印前请确认磁铁极性方向正确。
you can insert 5*1mm magnet after the print
你可以在打印后再放入5*1mm的磁铁
License:
MakerWorld Exclusive License
Nobod1Studio
