Demons / Fiends - DnD Mini (50mm)

Boost MeI hope you like the model, if so, please leave a like and a comment.
And if not, let me know what could be improved

Show me your finished prints in the comments, no matter if its in a DnD campaing 🎲 or painted on your shelf 🖌️

 

Unleash a horde of terrifying dark fantasy Demons / Fiends designed to strike fear into your players and look stunning on the battle map.

This premium set of imposing, demonic monstrosities features three different hellspawns in dynamic poses, optimized to unleash the terror in your next encounter.

 

There are two options

1. Complete models

   Here is an overview of how hard each model is to print in one piece
   Breaker  *

   Lord        **

   Slicer       ***

    

2. Models in Parts (Recommended)
   They are much easier to print and will look better due to the optimal orientation of each part like the horns or the staff
   Must be glued together.
   Make sure the surfaces for glueing are clean there is no leftover from the supports.

    

If you have problems with the spidery-legs of the Lord, activate Z-Hop in your filament settings.

 

For the best result, use the print preset in the print profile. 
This preset is optimized for a 0.4 nozzle.

The minis are on a standard 50mm base (large creature) and are detailed enough to be scaled up.

 

If you want to speed up the print, increase the print speed and layer height slightly.

If you are not sure, feel free to post your questions on the comments.