Fiat Panda Dashboard Smartphone Holder

Description:
I designed this smartphone holder specifically for the iconic Fiat Panda dashboard.

The holder has been designed to accommodate a wide range of smartphone sizes and fits securely into the dashboard storage compartment without requiring permanent modifications to the vehicle.

For improved heat resistance and durability, I printed the model using ABS. However, PETG could also be a suitable alternative, although ABS is recommended, especially for vehicles exposed to high temperatures. 

 

Assembly Hardware Required

To assemble the holder, you will need the following hardware:

2× M3 × 30 mm Countersunk Hex Socket Screws
1× M3 × 16 mm Countersunk Hex Socket Screw
1× M3 × 12 mm Countersunk Hex Socket Screw
  https://it.aliexpress.com/item/1005002044837898.html?spm= 
  https://www.amazon.it/BOUMVID-svasata-incassato-filettatura-completa/dp/B0DC6T96MY/ref= 

 

 

 

4× M3 Nuts
  https://www.amazon.it/Lyeteung-Esagonali-Esagonale-Filettato-Trasparente/dp/B0FWVWDVXT/ref= 
  https://it.aliexpress.com/item/1005010368441424.html?spm= 

 

 

 

1× Traction Spring – 5.5/6.0mm Outer Diameter × 20mm Length × 0.5mm Wire Diameter
  https://it.aliexpress.com/item/1005007596268334.html?spm= 

 

 

 

The Fusion 360 (.f3d) source file is included,
allowing easy modification of dimensions to adapt the holders to different socket sets.

 

This model was printed with Bambu Lab ABS in the following colors:
Black  40101    https://eu.store.bambulab.com/it/products/abs-filament?id=42917259051227 

 

 

 

Boost MePer favore, considera un boost, significherebbe molto