ZOHD Altus Walksnail Avatar GT2 nose cone

ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.

I have added a cut-out for easier access to the SD card. The camera has a small amount of tilt adjustment, and I have also added locking screws for the antennas, allowing their extension to be adjusted as well.

To install the GT2 kit, you will need:

• VTX: 4 × M2 × 4–5 mm screws
• Camera: 4 × M2 × 5 mm screws
• Antennas: 2 × M2.5 × 5 mm screws (these holes must be threaded/tapped)

This nose cone is specifically designed to accommodate the Walksnail Avatar GT2 system. Mounted to the front plate using 2x M2,5 OEM bolts.