BOBCAT Portable Tire Inflator Storage Case

Print Profile Description

Custom storage case designed specifically for the BOBCAT Portable Tire Inflator. This print provides a durable and organized solution for storing the inflator, hose, charging cable, and accessories while protecting them during transport and storage.

The model is optimized for easy printing and produces a sturdy case suitable for keeping in your vehicle, garage, workshop, camper, or emergency roadside kit.

Compatible Inflator

BOBCAT Portable Tire Inflator Air Compressor (150 PSI)
https://www.amazon.com/dp/B0GMJM5RM3

Recommended Print Settings

• Layer Height: 0.20mm
• Wall Loops: 3–4
• Top/Bottom Layers: 5
• Infill: 15–20% Gyroid or Grid
• Supports: Only where required
• Material: PLA, PETG, or ABS
• Nozzle: 0.4mm

Recommended Materials

• PLA for general indoor use
• PETG for vehicle storage and higher temperature environments
• ABS/ASA for maximum heat resistance

Notes

• PETG is recommended if the case will be stored in a vehicle during hot weather.
• Ensure the first layer is well adhered for the best fit and dimensional accuracy.
• Print all parts at 100% scale.
• This model is not affiliated with or endorsed by BOBCAT. The inflator is referenced solely for compatibility purposes.

If you enjoy this model, please leave a rating, post a make, and share photos of your print!