WITHERED FREDDY articulated figure #EndoEdition

PLEASE READ: This model is seperated into 2 plates, one for the endoskeleton and one for the armour.

(Refer to this attatched video for assembly guide: Instructional video ) 

Boost MeIf you liked this print or any of my other works, please consider leaving a BOOST! I would greatly appreciate it and it helps me design more models like these!

This is a model of Withered Freddy from popular indie horror game FNAF 2! Its a fully articulating figure that comes together easily with just a few ball joints (Refer to attatched video for assembly guide) . Its outer covering is removable to reveal the endo skeleton inside! The print time is roughly 3 hours ( to print all plates).

 

This is ENDO EDITION,  and this model is the third in my  series of action figures, heavily inspired by the endo series toy line by Jazwares. These models include an endo skeleton as well as an accomponying armour to bring the FNAF character to life! This gimmick not only makes these figures extra customizable, but also helps reduce print time, increase tolerance and remove the need for sanding as every part is in its optimal orientation for printing. 

 

I am also happy to say that Freddy's design has been greatly improved from bonnie and foxy's! As a lot of you guys feedbacked that the joints and armour were quite loose in previous designs, Ive made adjustments in this most recent model. 

 

Feel free to change or add to this model as long as you credit me too 🤩 🙏. If your are intersted in the other articulated  FNAF 

figurines, you can check out my other designs here! 

 

FNAF 2: https://makerworld.com/en/collections/26858668-fnaf-2

 

For other Endo edition figures: 

Whithered bonnie: https://makerworld.com/en/models/2858006-withered-bonnie-articulated-figure-endoedition#profileId-3188888

 

Withered foxy: https://makerworld.com/en/models/2830233-withered-foxy-articulated-figure-1-12-endoedition#profileId-3153537