A simple, smart, and highly functional accessory for above-ground frame pools. I originally designed this hook for an Intex rectangular pool, but it is fully compatible with any pool brand featuring a 38mm (1.5") diameter round top frame.
It is the perfect solution for keeping your pool skimmer nets, telescopic poles, or other maintenance tools organized, clean, and always within arm's reach right on the side of the pool.
Key Features:
- Simple yet effective: Clean, minimalist design that fits snugly onto the pool frame.
- No Supports Needed: Optimally designed to be printed flat on its side (as shown in the pictures) without any support material.
- Fast Print: Time-efficient and filament-saving geometry.
- Stable Fit: The built-in spacer block prevents the hook from wobbling against the flexible pool wall.
Recommended Print Settings:
- Filament: PETG (Highly recommended due to UV exposure, summer heat, and pool chemicals. PLA will soften and deform under the direct sun).
- Orientation: Print flat on its side (refer to the 3rd product photo).
- Wall Loops: 3 (Crucial for structural strength and hook flexibility).
- Infill: 15-20% Gyroid (Provides the best omnidirectional strength).
Tip: Print at least 2 pieces to properly support and balance long poles or heavy skimmer nets.
☕ Support the Creator
If you like this project and want to support my work:
👉 buymeacoffee.com/Allerzoltan
- Like 💛
- Comment if you have questions or suggestions
- Check out my other models too!
- Follow me fore more!
😊 Thank you so much for your support!
Boost MeWhen You like my model please send me a boost 😊
-It doesn't cost you anything
-But you can support my work so that more plans can be made
Thank You! 😊
Allerzoltan
