Gangster Cat HueForge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.96mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #84754e PLA BambuLab Basic Bronze  Transmission Distance: 1
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer  (0.84mm) swap to Blue Gray
    At layer  (1.2mm) swap to Bronze
    At layer  (1.52mm) swap to Jade White for the rest.