Digimon: Patamon Figure (No AMS)

Components Needed

• Adhesive: Superglue or plastic cement is required to assemble the body and eyes.
• Detailing Tools:
  • Acrylic Markers: Black (for claws/nails), Pink/Red (for the inside of the mouth), and Light Blue/White (for eye touch-ups if needed).
  • Eye Highlight Tip: A white paint marker OR a tiny snipped piece of a white filament purge/test line.
• No AMS Required: Parts are separated by color for standard single-extruder printers.

Assembly & Painting Instructions

1. Print the Parts:
   • Lower Body/Belly: Print in Beige/Cream filament (As seen in 1, 2.jpg).
   • Upper Body/Wings: Print in Vibrant Orange filament (As seen in 3, 4.jpg).
   • Eyes: Print the base eye parts in Black/Blue (As seen in 5.jpg).
2. Painting Details (Enhance Quality):
   • Use a black acrylic marker to paint the tiny claws on the front and back paws (1, 3.jpg).
   • Color the inside of the mouth with a pink or red marker to make the expression pop.
3. The Eye Highlight Pro-Tip:
   • To give Patamon his signature lively gaze, use a fine white marker to dot the eyes.
   • Alternative Method: Cut a very tiny piece from a white filament test line (purge line) and glue it onto the pupil. This creates a perfect, crisp 3D highlight!
4. Final Assembly:
   • Apply superglue to the mating seams of the lower belly and upper wing parts, then press them together.
   • Glue the completed eye pieces into the designated sockets on the face (6.jpg).
   • Let it dry completely, and your perfect Patamon is ready to display (6.jpg & 7.jpg)!

Follow me on Instagram for more designs: @frogmin_97