Misa and Rem Death Note Hueforge

Project: Misa and Rem.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 156x234mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5.8
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 3.7
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 5.2
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Jade White
    At layer #19 (1.6mm) swap to Black
    At layer #20 (1.68mm) swap to Blue
    At layer #22 (1.84mm) swap to Red
    At layer #27 (2.24mm) swap to Yellow
    At layer #28 (2.32mm) swap to Jade White
    At layer #31 (2.56mm) swap to Yellow
    At layer #33 (2.72mm) swap to Jade White for the rest.

For single AMS users, start with 4 colors as follows,
Slot1: Black
Slot2: Blue Grey
Slot3: White
Slot4: Blue
1st pause was set at Layer 12 to allow color swap:
Slot2: Blue Grey --> Red
2nd pause was set at Layer 23 to allow color swap:
Slot4: Blue --> Yellow