Bambu A2L X-Axis LED Fill Light

Step 1

Affix the LED strip to the printed bracket.

⚠️ Note: The non-wired end of the strip faces the 'R' mark on the bracket, flush against the bracket edge.

Step 2

Press the power cable of the LED light strip firmly into the cable retention slot along the edge of the bracket.

Step 3

Secure the bracket to the rear side of the X-axis using 2 screws; you may reuse 2 of the screws previously removed from the Z-axis mount.

⚠️ Note: Ensure the LED diodes face downward when mounting.

Step 4

Secure the power cable of the LED light strip to the Z-axis carriage using a zip tie.