WITHERED CHICA articulated figure #EndoEdition

PLEASE READ: This model is seperated into 3 plates, one for the endoskeleton and two for the armour.

(Refer to this attatched video for assembly guide: Instructional video ) 

 

This is a model of Withered Chica from popular indie horror game FNAF 2! Its a fully articulating figure that comes together easily with just a few ball joints (Refer to attatched video for assembly guide) . Its outer covering is removable to reveal the endo skeleton inside! The print time is roughly 3 hours ( to print all plates).

 

This is ENDO EDITION,  and this model is the fifth in my  series of action figures, heavily inspired by the endo series toy line by Jazwares. These models include an endo skeleton as well as an accomponying armour to bring the FNAF character to life! This gimmick not only makes these figures extra customizable, but also helps reduce print time, increase tolerance and remove the need for sanding as every part is in its optimal orientation for printing. 

 

Feel free to change or add to this model as long as you credit me too 🤩 🙏. If your are intersted in the other articulated  FNAF 

figurines, you can check out my other designs here! 

 

FNAF 2: https://makerworld.com/en/collections/26858668-fnaf-2

 

For other Endo edition figures: 

Whithered bonnie: https://makerworld.com/en/models/2858006-withered-bonnie-articulated-figure-endoedition#profileId-3188888

 

Withered foxy: https://makerworld.com/en/models/2830233-withered-foxy-articulated-figure-1-12-endoedition#profileId-3153537

 

Withered Freddy: https://makerworld.com/en/models/2914290-withered-freddy-articulated-figure-endoedition#profileId-3259839

 

Boost MeIf you liked this print or any of my other works, please consider leaving a BOOST! I would greatly appreciate it and it helps me design more models like these!