Angled Cup Holder - Espresso Machine Low Clearance

Tilts your glass forward so taller cups, mugs and glasses fit under a low espresso group head or spout, no more swapping to tiny shot glasses.

 

The open, frame-style design sits directly on the drip tray grate or on a scale and cradles the glass at an angle, putting the rim right under the outlet while the base clears the portafilter. Because the cradle is open, it works with a wide range of glasses. Designed around ~80 mm diameter, but smaller and larger glasses fit fine too.

•  universal – not tied to one machine, fits most espresso machines with a drip tray grate
• allows the use of a scale for taller glasses
• open design – one part, no supports, no assembly

• frees up vertical clearance for latte, cortado, cappuccino and gibraltar glasses 

   

PRINT SETTINGS 

• Material: PLA is enough — sits on the grate, not in standing hot water, so heat is a non-issue in normal use. If your tray runs unusually hot, PETG is a safe alternative.
• Supports: none
• Infill: 15–20%
• Layer height: 0.16 mm
• Orientation: as oriented in the profile (flat base down)

Boost MeThanks! :)