OneWall - Vase-Mode Bin & Container Customizer 3D Printer File Image 1

OneWall - Vase-Mode Bin & Container Customizer 3D Printer File Image 2

OneWall - Vase-Mode Bin & Container Customizer

Description

OneWall is a parametric customizer for vase-mode 3D-printed bins and containers. Open the Customizer, move the sliders, and the geometry rebuilds live — every print comes out as a single continuous spiral wall with the @Amitkuzi signature engraved into the bottom.

What you can tune

Outer dimensions — width, depth, height, corner radius
Three-section height — base transition, mid-wall, top lip
Vertical profile — linear, barrel, hourglass, ogee, bell, double-bulge, or a custom sin curve
Wall texture — smooth, ribs, rings, grid, woven fabric, basket, diamond, helical flutes, knurl, or large wave
Top lip styles — rolled, flange, bead or ribbed (each gives the rim a different stiffness)
Decorative wave overlay with helical twist
Optional label recess on the front wall

Why vase mode?

The whole bin prints as one nozzle-wide perimeter spiralling up from a few solid bottom layers. Fast, gorgeous surface finish, and the woven / fabric textures act as stiffeners — the wall is thin (single line width) but the surface geometry makes it strong.

Critical slicer setting

Bottom shell layers = 3 (Bambu Studio: Strength → Bottom shell layers).
The @Amitkuzi signature is engraved 0.2 mm deep into the bin's first layer. With 2 or more bottom shell layers the engraving is hidden inside the solid floor and visible only when you flip the print over — exactly the maker's mark you want. With only 1 bottom shell layer the engraving punches through.