Bring Kirby directly to your wardrobe. This is an ultra-thin, flexible emblem specifically designed to be heat-transferred onto t-shirts, hoodies, or canvas bags using your 3D printer. This single-color profile provides a seamless finish that melts into the fabric fibers for an incredible custom look.
How to Make It:
- Print: Use the pre-configured profile. The thickness is optimized at 0.30mm (2 layers) for maximum flexibility and a lightweight feel.
- Placement: Place your t-shirt on a hard, flat surface. Position your printed Pikachu exactly where you want it.
- Protection: Cover the entire design with parchment paper.
- The Pre-Lock: Press firmly with a hot iron (NO STEAM, Cotton/Max setting) for 5 to 8 seconds just to fuse the plastic to the fabric.
- The Pro-Trick: Turn the t-shirt inside out. Iron directly from the back of the fabric for 15-20 seconds while applying heavy pressure. This forces the melted plastic into the textile fibers for a permanent bond.
- Cooling: Let it cool down completely before peeling off the parchment paper.
Care Instructions:
- Material: TPU is recommended for clothes you actually wear so it stretches with the fabric. PLA works but might crack over time with heavy stretching.
- Washing: Wash inside out at 30C max.
- Drying: Air dry only. Do not tumble dry.
Technical Specifications:
- Layer Height: 0.16mm
- Total Thickness: 0.30mm (2 layers)
- Wall Generator: Arachne enabled to ensure all sharp line endings, like the ears and tail tips, print perfectly without gaps.
- Ironing: Enabled on the top layer for a perfectly smooth surface.
- Print Bed: Textured PEI
If you like the result, upload a photo of your creation! I'd love to see what pieces you've used it on! ⭐⭐⭐⭐⭐
godzilla67
