IKEA Landskrona Leg Riser +20 mm

I designed these risers to raise an IKEA Landskrona sofa by an additional 20 mm.

My main goal was to create enough clearance to fit a treadmill underneath the sofa, but the model can also be useful whenever a little extra space under furniture is needed.

The risers are designed for standard IKEA Landskrona wooden legs with a diameter of approximately 44 mm and a height of approximately 150 mm.

An additional 20 mm may not sound like much, but it is often exactly what is needed to fit a treadmill, robot vacuum, storage boxes, or other items underneath a sofa.

The model was printed in PLA and is currently being used under an IKEA Landskrona sofa without any issues.

Features

✔ Raises the sofa by approximately 20 mm

✔ Designed for legs with a diameter of approximately 44 mm

✔ No supports required

✔ Stable construction

✔ Easy tool-free installation

Applications

• increasing sofa clearance
• fitting a treadmill under the sofa
• robot vacuum clearance
• extra furniture height
• easier cleaning underneath the sofa

Recommended Print Settings

The model was tested using the following settings:

• Material: PLA
• Nozzle: 0.4 mm
• Layer Height: 0.20 mm
• Infill: 50%
• Infill Pattern: Gyroid
• Wall Loops: 4
• Supports: No
• Brim: No

Since this model supports the weight of the furniture, I recommend using a higher infill percentage and at least 4 wall loops for improved strength and durability.

Note

This model was designed for furniture legs with a diameter of approximately 44 mm. Please measure your legs before printing, as dimensions may vary slightly between different versions of the furniture.