After the massive success of Rasta Mario, the community has spoken... and the taller, greener half of the Rasta Bros couldn't be left behind!
Say hello to Rasta Luigi!
Engineered completely from scratch to bring you the highest quality, most colorful 3D model possible WITHOUT needing an AMS / MMU system!
Every single part is printed separately in its own color and fits together seamlessly. No paint, no color bleeding, no wasted filament... just a dab of glue here and there, and pure technical craftsmanship.
🛠️ Design Features & Clever Engineering
🚫 No-AMS Multipart Magic: 100% optimized for single-extruder printers. Every rasta-vibe detail is its own physical part.
♻️ Zero Waste: No purge blocks, no wasted filament, and no endless color swaps.
🧩 86-Piece Puzzle: An incredibly satisfying, fun, and clean assembly experience.
📏 27cm Tall (Scalable): Stands 27cm high at 100% scale. Feel free to upscale for an even bigger model, but downscaling is NOT recommended, as tiny parts like the eye glow and sneaker logos will become impossible to print!
📈 Foolproof .3MF Included: All parts are neatly organized and pre-sorted on separate print beds by color for an easy print workflow.
📋 Assembly Instructions
Left vs. Right Warning: All parts that have a left and right side are pre-sorted on the print plates on their correct side. Try not to mix up left and right, or they won't fit! (When in doubt, check the object names in your slicer).
Prep Work: Make sure all support material is completely and cleanly removed before assembling.
Final Touch: Finish off all low-friction parts with a dab of glue to make the entire model solid.
🧢 The Adihash Rastacap
The green, yellow, and red parts of the cap lock together with addet pins.
Secure the pom-pom and the side branding with some glue.
The Adihash cap logo might be a little tight, but it can be pressed in gently with some pliers.
🦱 The Hair & Dreadlocks
The hair features dreadlock with rasta rings that need to be slid on in the correct order!
Finish the dreadlocks off by securing them with the dreadlock cap.
When putting the hat on hair.. hold the front end.. then satisfyingly snap in the back.
👤 The Head & Face
It is best to glue all the face parts into the head first before attaching the dreadlocks. This ensures the hair won't get in the way when positioning the eyebrows and eyes.
The white eye parts might feel a bit tight due to their unique shape, but they can be pressed in gently using the back of a screwdriver if you are having trouble.
The tiny eye glows and teeth are best handled using tweezers.
Once the face is done, glue the hair and cap onto the head.
Add a dab of glue to the pins of the earrings to keep them nicely in place, then slide the completed head into the shirt piece.
👕 The Overalls & Torso
⚠️ Important Slicer Note: The collar hole in the overall uses a Negative Part built into the .3MF so the slicer cuts the interlocking geometry live! Do NOT remove or change the position of this negative part.
Arms: Assemble the arms/hands first using the separately printed pins. Insert the pins into the arm pieces, then slide on the yellow and red rings in the correct direction, order, and side. Add a dab of glue into the hands and connect them to finish the arms.
Glue the completed arms securely into the overall sockets.
Slide the shirt piece (with the head attached) into the torso.
Necklace: Glue the top tips of the necklace cords under the shirt collar first. Then, glue the other ends into the medallion, and glue the medallion onto the chest pocket.
Glue the golden buttons into place to secure them.
🧦 The Socks
The red, yellow, and green socks stack vertically over a heavy-duty, tapered structural pin. This single pin anchors everything firmly through the shoes and straight into the overall legs.
👟 The Adihash Sneakers
First, slide the black MID part into position underneath the beige BASIS part. (You can insert the sock pin now to temporarily hold them together).
Press the green, yellow, and red branding stripes gently into the side slots using some pliers (make sure to keep the order and sides correct!).
Add the heel and the top pieces, then slide/glue the entire assembly into the beige shoe sole.
Press the laces gently into place using pliers.
Finally, glue the Adihash badge onto the tongue.. and you've got yourself some Adihash sneakers!
Your Rasta Luigi is ready to join his brother! 🤗
🫶🏼 I am combining this passion for 3D design with a demanding full-time job, spending all of my free time to make these models perfect and foolproof. If you appreciate the hundreds of hours of work that went into this project, please consider showing some love! A nice message in the comments, a picture of your finished print, a simple like, or maybe even a Boost Token keeps me motivated to create more for you guys. 🙏
Enjoy the print, share your awesome makes, and let the Rasta family take over your print bed! 🫶🏼🚀🌱
Did you miss out on his Brother? Time to Reunite them! 🤗
PeeTn
