Boost MeIf you like this design and want to support more practical prints like this, a Boost is highly appreciated. Thank you for supporting my work!
Tired of cleaning up dust after drilling?
This simple tool catches dust directly while you drill – no vacuum, no mess, no extra cleanup.
This drill dust collector is designed to catch debris directly at the source while drilling into walls. Simply hold it against the wall and drill through the center opening – the dust falls straight into the container instead of onto your floor.
Two versions are included:
- Standard version (round)
- Version with extended top surface for improved grip and easier handling (square)
The centered guide hole helps you position your drill accurately while keeping the surrounding area clean.
No vacuum cleaner needed – quick, simple, and effective.
Features
- Clean drilling with minimal mess
- Two variants for different handling preferences
- Extended version offers better grip
- No additional parts required
- Fast and easy to print
Print Settings
- Material: PLA or PETG (PETG recommended for durability)
- Layer height: 0.2 mm
- Infill: 15%
- Walls: 2 perimeters
- Supports: not required
- Brim/Raft: not required
- Print orientation: flat on the back side
Usage
- Place the dust collector against the wall
- Hold it in position
- Drill through the center hole
- Dust is collected inside the container
Tip: Apply slight pressure against the wall for best results.
Notes
- Not suitable for overhead drilling
- Very fine dust (e.g. concrete) may partially escape
- Best results with steady drilling
RetroPurp
