T-34-88 747 (R) 1/35 Turret

EDIT: Fixed muzzle.

If you like what i do please consider sharing or support me! this is a hobby and your help would be really appreciated! ❤️😊

 

Your comments will help future projects and improve quality!

Boost MeIf you want to support the making of more models and greater quality, supporting is the best you can do! Follow me for better models in the future!

 

The mystery of the T-34-88

 

Rumors of a captured T-34 with a Tiger's gun have been around for a long time, with new clues still appearing up to the actuality.

The legend says that when a group of T-34 were captured, German engineers found a way to not only adapt the tank to their needs, but also install the mighty KwK36 88mm gun used on the Panzer VI; The tiger. 

 

Bring the legend to life by printing this turret for Bavaria's modular platform!

 

The Design:

 By using Bavaria's t-34-85 turret as a reference, i made the variations the German engineers did to their tanks.

 

 

 

PRINTING:

Filament: PLA.  Using others may generate issues.

Slicer:  I recommend using the default profile.

Print Bed: Wash if necessary, then dry thoroughly for good adhesion. For small parts, apply a glue stick. 

Temperature:  keep your room above 20°C (68°F) to prevent issues, especially if you use an open frame printer.

 

ASSEMBLY:

Red lines indicate glue 

Blue lines are moving parts, no glue. 

You will need a short filament strand to install as an antenna

 

Boost MeIf you want to support the making of more models and greater quality, supporting is the best you can do! Follow me for better models in the future!

Need Help? 

 

Don't doubt on commenting or contacting me! Your feedback is essential for the quality to be excellent and push the limits of tank design! My models are for the enthusiastic and your view and opinion is important!  

 

THANK YOU!!!

 

EDIT :  Fixed the orientation of the cannon muzzle.